BODY shell - TBA

• 1 High impact resistant, corrosion free GRP sandwich body shell
• Length approx.. 4500 mm (inside)
• Width approx..  2100 mm (inside)
• Height approx.. 1950 mm (inside)

DOORS AND EXTERIOR LOCKER DOORS IN BODY SHELL

• All doors and exterior locker doors come with aluminium Hinges and security locks
• 1 main door
• 1 exterior locker door on RH side (to access rear bed)
• 1 exterior locker door on LH side (to access rear bed)

WINDOWS IN body shell

Supply and installation of  Seitz windows including Mossi-netting and blinds (3 x 1100 mm x 550 mm sliding)

WATER SYSTEM

• 1 x fresh water tank (approx.. 120 l)
• 1 x 12 V water pump
• 1 x grey water tank (approx.. 80 l) with dumb valve

GAS SYSTEM

• 1 x 2 kg gas bottle incl gas bottle holder
• 1 x 28 mbar gas regulator

ELECTRIC

• 1 LED light underneath the overhead locker above the kitchen
• 4 LED lights in the overhead locker above rear sitting/sleeping area
• 1 220 V exterior caravan main socket
• 1 220 V exterior standard triple household outlet with lid fitted on RH side of entrance door
• 1 220 V interior standard double household outlets by the sitting/Sleeping area
• 1 220 V interior standard double household outlet for fridge/freezer

FURNITURE

• All furniture manufactured from our imported superlight poplar ply wood varnished with clear coat.
• All doors and drawers will be fitted with push button locks in polish Chrome finish.

INTERIOR LAYOUT

• DINING/SLEEPING AREA:
  2 single benches each on LH and RH side at rear and 1 bench along the rear  wall in u-form with 100 mm high density foam with table to be able to fold down to a bed area with storage space from the rear (when doors are open.
  1 overhead locker each on RH and LH side with doors and shelf fitted
• KITCHEN:
  1 drawer unit on RH side with drawers and 1 service flap for sink with  Standard Formica worktop
  1 cupboard to house fridge/freezer and microwave as well as hanging clothes and TV cabinet on RH sid
• BATHROOM:
  1 foldable hand wash basin
  1 overhead locker with door and shelves positioned above toilet
  1 mirror fitted on bathroom door inside
  1 GRP shower tray
  1 GRP hand basin oval in white
  1 hot and cold water tap in chrome finish fitted in bathroom To supply hand wash basin
  1 freshwater cassette toilet with holding tank
  1 standard shower curtain
  (toilet roll holder, soap dispenser, towel holder, toothbrush holder)

EXTRAS:

• Adjustable table leg
• Grab handle in stainless steel installed at entrance
• 2 smaller grab handles in stainless steel installed at the rear @R 425.00
• Coolmatic fridge/freezer 90 l incl installation
• Microwave incl fitting
• 2-burner-stove-sink-combination
• Stainless steel foldable water tap for stove-sink-combination
• Installation of a multi-plug in kitchen worktop
• Extraction fan on the side in bathroom installed
• 1 extra 2 kg gas bottle
• Caravan lead
• 2 x fire extinguisher incl brackets and fitting
• Supply and fit yellow reflector tape and reflector lights at rear
• 2 x 12 V 100 Ah deep cycle battery (for the rear part) 
• Manufacture and install battery box underneath vehicle
• Supply and fit 2000 kwh Inverter
• Hotwater geyser including installationInstall water filter (supplied by the customer) in kitchenCarpeting of storage compartment on top of front cabWith locker door installedInstallation of TV and DVD player supplied by the customerincl special bracket for the TV   SAT Dish One Light 65 cm automatic with dual LNB Including installationSAT dish remote control

  Battery charger

   

  2.9 m Fiamma awning including special brackets and fitting

  Manufacture and install gas bottle compartment with air holes

  And lid

  Aircon roof mounted including installation

  Modifications to the towbar including installation (by customer

  supplied parts)

  Swivel base at the passenger seat including changes 

  to seat box

  Relais for starter battery (when your front battery is flat)

  Installation of supplied sensors at the rear of the vehicle

  Supply and fit bulbar in stainless steel to the front of the vehicle

  Dismantle generator supplied by the customer and manufacture 

  Cage to install it underneath the vehicle, extend pull cord

  Additional relays installed due to generator    

  Supply and fit electrical step at entrance                    

  Homologation of Fiat Ducato panelvan including 

  Inspection costs, done by NRCS

  Roadworthy, Weighbridge, Dataplate and Certificates

Roadworthy, Weigh bridge, Dataplate and Certificates